Joysticks controller
Joysticks can be found with one-, two-, tree- and four-axis.
Joysticks can be supplied with non-contact Hall effect sensors, Canbus or PWM option and long life potentiometer tracks.
JC6000 Is available with one or two axis configurations and can be supplied with non-contact Hall effect sensors or long life potentiometer.
JC2000 New low profile joystick handle for chest packs and robotics equipment.
JC3000 Single and Dual axis Fingertip Joystick.
JC1500 Rugged Single-Axis Contactless Joystick.
JC100 Single-Axis fingertip joystick. Sealed to IP68.
JC120 Is a compact, low profile joystick that provides smooth, precise fingertip control in one axis.
JC025 and JC030 and single axis fingertip rocker.
JC400 Single, Dual or Three axis operation. Choice of mounting flanges. Sealed to IP65 above the flange.
JC150 Single axis control. Sealed to IP65. Rugged design.
JC6000: Rugged Multi-Axis Joystick
NEW! Introducing the next generation of rugged controllers from Penny + Giles.
The new JC6000 rugged joystick controller is designed for demanding operator control applications in off-highway vehicles and other man-machine interfaces, where strength, reliability, and handle functionality are important.
The JC6000 is available with one or two axis configurations and can be supplied with non-contact Hall effect sensors or long life potentiometer tracks. The compact size, high lever strength and superb proportional control are ideal for applications which include operator controls on a wide range of off-highway vehicles, including cranes, loaders, excavators, access platforms, tractors and harvesters.
Key Features
Rugged design with superior lever strength
Single or Dual axis control
Range of ergonomic handle designs
Hall Effect or Potentiometric sensing
Analog or CAN outputs
Sealed above panel to IP66
Safety features - switch/logic functions
Superb proportional control
Easily installed and interchangeable with model JC600
New joystick feature - CANBus available with JC6000
NEW! Penny + Giles is launching a new output option for its range of JC6000 robust multi-axis joysticks - CANbus.
As operators demand improved efficiency, responsiveness and functionality from their vehicles, OEMs are turning to CANbus systems to enable them to improve control systems in off-highway construction, municipal and agricultural vehicles. The company’s popular JC6000s can now be connected easily to the Bus network and communicate with add-on sub-systems and equipment such as hedge trimmers, and intelligent ploughs.
There is also a CANbus facility where additional input pins are provided in the joystick mating connector, enabling non-CANbus features to be connected directly to the Bus network without an extra node being required. This enables a system integrator to design smaller, neater joystick interfaces for applications such as machine armrests.
The CANbus option uses two Hall sensors in each of the XY axes to provide safe, reliable operation with the long life benefits of this contactless technology. This safety is further enhanced as signal integrity checks are carried out within the joystick.
The CANbus option benefits from the use of a moulded plastic cover with integrated connector providing an IP66 sealing rating below the panel when the appropriated sealed mating connector is used.
Penny + Giles offers a wide range of standard configurable handle designs including additional axes of control, momentary and person present switches that can be integrated into the CANbus output. Large volume OEM users can also benefit from the Penny + Giles custom-design service to develop handle formats that are unique to specialist vehicle functions.
Thanks to the modular ´designed-for-manufacture´ format of the JC6000, Penny + Giles is able to offer OEMs the flexibility of a wide range of options cost-effectively, making this a highly competitive choice, particularly for high volume users.
JC2000: Contactless Joystick
NEW! The JC2000 contactless joystick controller is designed for precision fingertip control applications where safety and long trouble-free life are primary requirements.
Available in one, two or three axis configurations and can accommodate a choice of handles, including push-button switch versions.
The JC2000´s compact size, low operational force and high reliability are ideal for applications which include powered wheelchair controllers, disabled mobility vehicles, robotic teach controllers, co-ordinate measuring machines, medical and CCTV equipment, professional camera controls and radio or infra-red crane chest-pack controllers.
Key Features
Compact size
Depth below panel less than 31mm
Contactless sensing system
No flexing wires (except when handle switches fitted)
Dual independant outputs on single/dual axis versions
Choice of handles with or without switch
Aligned seats (low force lever guidance)
Polarised latching connector
CE Approved
JC2000 Industrial robot controllers (IRC)
NEW! Joystick provides reliable programming of industrial robots.
Penny + Giles Controls Ltd is pleased to announce that it has supplied more than 9,000 JC2000 joysticks for use in ABB’s leading industrial robot controllers (IRC).
The contract, which was secured through Swedish distributor AB Elwia, follows the successful integration of the joystick as standard in the fifth generation IRC, the IRC5.
IRC is used for control and mechanical automation devices in a range of processes such as machine loading and unloading, positioning of work pieces, pouring of aluminium and press-to-press transfer of metal sheets. Each controller includes a ‘teach unit’ through which users programme the motion of each device using a joystick and ABB’s easy-to-use software interface.
“JC2000 was chosen primarily for its reliability,” explains Per Eric Carlsson, engineer for quality assurance of suppliers, ABB. “We had experienced some problems with the joysticks in the past and needed a fit and forget solution. We wanted to work with a partner that could deliver a cost-effective backwards compatible solution that could be integrated into the unit easily.”
Following an initial enquiry to Swedish distributor AB Elwia, the three companies worked closely together to develop a customised joystick for ABB’s fourth generation IRCs. The changes included a new custom-made 50mm2 mounting adaptor to enable the joystick to fit within the existing teach panel unit.
“The project is a testament to the excellent relationship we have with AB Elwia,” comments Les Metcalfe, Joystick Product Manager at Penny & Giles Controlls Ltd. “Together we were able to provide a winning combination of high-quality bespoke product and open communication between local contact, production floor and customer.”
JC2000 uses Hall Effect technology and is designed for precision fingertip control applications. This contact-less system offers almost limitless life and zero maintenance. Compact, it comes in one, two or three axis configurations and sales of the JC2000 have now reached over half a million worldwide.
JC2000: New low profile joystick handle for chest packs and robotics equipment
NEW! New handle for its popular JC2000 joystick controller. Designed specifically for remote operation chest packs and robotics equipment, the HL handle measures just 57mm in height providing OEMs with a low profile that enables greater flexibility of design and increased durability of equipment.
The new handle, which can be used for one, two or three axis operation, has been created for units that have limited protection around the joystick or which require multiple controllers within a small surface area. By reducing the profile, damage to the joystick can be minimised should the unit be mishandled (for example if a chest pack is dropped during operation). It also reduces the chances of operators leaning on other handles during operation causing un-necessary wear and tear.
Its low profile, combined with a below mounting flange depth of only 31mm, enables designers to meet increasing demand for smaller, more compact control units. Sealed to IP65 with hidden fixings ensures protection in environments where dust and other particles may be present.
JC2000 is a reliable, proven joystick controller based on non-contact Hall-effect technology. Used for precision fingertip control in radio/infrared chest packs and robotic teach controllers and for more than five years, it provides smooth and accurate control where safety and long life are primary requirements.
JC400: Multi-Axis Fingertip Joystick
Designed for use with an electronic controller, the JC400 can be specified to generate three switched outputs per half axis, or analogue and switched reference signals proportional to the distance and direction over which the handle is moved.
Installation flexibility has been provided by using different forms of mounting flanges independent of the function of the joystick. The elimination of micro switches and camshafts has removed the need to maintain the joystick throughout its operating life of in excess of 5 million cycles.
The JC400´s range of ergonomic handle options feature rotary operated potentiometers, or switches, for a third axis control, or ´Deadman´s´ switches that can be used to improve the integrity of your control system.
Typical applications include remote control sytems, CCTV camera manipulation and the control of agricultural and material handling equipment.
Key Features
Single, Dual or Three axis operation
Choice of mounting flanges
Sealed to IP65 above the flange
Range of ergonomic handle designs
Lever gate profile and lever spring strength options
Superb proportional control with analogue and switched outputs
Choice of track resistance values and output ranges
Switched output option with detent feel.
Long operational life
JC1500 Rugged Single-Axis Contactless Joystick
NEW! New single axis joystick controller design that enables use in heavy duty applications without compromising on smooth proportional control. The JC1500 joystick utilises contactless rotary position sensor technology combined with a rugged, low profile design.
The joystick provides reliable and accurate output signals - and includes a second output to enable error checking of the system integrity. The JC1500 is intended for use in the off-highway specialist vehicles market - particularly where reliability and strength are paramount e.g. Aerial Work Platforms.
The JC1500 joystick complements the existing range of JC150 potentiometer track joysticks and has the same panel mounting details – allowing replacement or upgrade with no panel modifications. The new joystick is designed to share the same range of handles and grips used in the JC150 and JC6000 models.
Key Features
Contactless – Hall effect technology
Single axis control with spring to center or friction hold lever action
Lock and detent features
Choice of handles and grips
5Vdc or 9-30Vdc supply
Dual channel output with optional ramp directions
Analog (Vdc) or Digital (PWM) outputs
Extremely low signal noise – less than 1mVrms
Operating temperature -40 to +85°C
Environmental protection to IP69K above the panel
53mm under-panel depth
Electrically interchangeable with potentiometers
JC120: Single-Axis Fingertip Joystick
Developed for applications where ergonomics and system integrity are paramount, the JC120 is a minimum width, low profile joystick that provides smooth, precise fingertip control in one axis with a choice of two lever lengths.
The JC120 is sealed to IP66 to enable it to operate in extreme environments. Standing only 54 or 64mm high, the JC120 is less susceptible to unintentional operation. With all of the components contained within the handle, it is ideal for mounting in low profile panels and arm rests.
Installation time has been reduced through the use of a standard 7-pin Molex electronic connector, and the joystick has been designed for maintenance-free operation throughout on operating life of greater than five million operations.
An optional neoprene boot is available for the short handle version, allowing operation in environments where aggressive materials are present, protecting from dust and dirt ingress.
New friction hold versions have been introduced, which allow the lever to be set to a specific position for applications such as setting speed controls.
Typical applications include remote control chest packs and the control of construction, agricultural or material handling equipment.
Key Features
Width only 26.5mm
Low profile ergonomic design
Choice of lever heights
Center or End return spring mechanism - with or without mechanical detents
Friction hold version - with or without mechanical detents
Sealed to IP67 with optional neoprene boot for aggressive particle protection
Choice of track resistance values and output ranges
Standard Molex automotive connector
JC120: New joystick option protects against ingress of dust and dirt
New joystick option protects against ingress of dust and dirt
Developed a protective boot for its JC120 single axis fingertip joystick. Designed for use in environments where aggressive materials are present, the boot protects against the ingress of dust and dirt. As a result, manufacturers of control and handling equipment can be assured of consistent, accurate operation and longer operating life despite harsh conditions.
The boot is made from Neoprene, chosen for its resistance to deterioration from fats, oils, greases and many other petroleum-based products. It has excellent weathering properties and is self-extinguishing, making it ideal for the conditions often found in the production and storage of materials such as aggregates, chemicals and agricultural foodstuffs.
Sealed to IP67 with the boot fitted, JC120 is typically used in remote control ‘chest packs’, robotics, remote camera controls and agricultural and material handling equipment. A small, compact joystick measuring only 26.5mm width (28.5mm with the boot fitted) it features a pivoting lever design that provides one axis of forward and reverse movement and a spring-return to centre. Electrical connections are through a 7-pin Molex 70553 series latching male connector on the joystick base.
JC100: Single-Axis Fingertip Joystick
Designed for use with electronic controllers, the conductive plastic track in the JC100 generates analogue and switched reference signals, proportional to the distance and direction over which the handle is moved.
Sealed to IP66, the JC100 is suitable for the most extreme environments. Installation time is reduced through the use of standard automotive connectors, whilst the removal of all micro switches and camshafts has eliminated the need to maintain the joystick throughout its operating life in excess of 5 million cycles.
Typical applications include remote control chest packs and the control of agricultural and material handling equipment.
Key Features
Low profile ergonomic design
Analogue and switched outputs
Center return spring mechanism
Choice of track resistance values and output ranges
Standard Dupont automotive connector
JC150: Rugged Single-Axis Joystick
Designed for use with an electronic controller, the conductive plastic track in the JC150 generates analogue and switched reference signals, proportional to the distance and direction over which the handle is moved.
The functionality of the JC150 can be increased by the inclusion of potentiometers, switches, membrane keypads and/or LED displays in its handle. "Deadman´s" switches or center lock mechanisms can also be specified to improve the integrity of your control system.
With an expected life in excess of 5 million operations, the JC150 is ideally suited to the control of access platforms, agricultural, construction and material handling equipment.
Key Features
Single axis control
Sealed to IP65
Rugged design
Center lever lock and detent options
Range of handle designs
Superb proportional control with analogue and switched outputs
Choice of track resistance values and output ranges
Long operational life
Standard AMP automotive connectors
JC025 and JC030: Single Axis Fingertip Rocker
The JC025 and JC030 and single axis fingertip rocker allows system designers to provide control of movement and speed in a single low-profile unit.
Developed for applications where compact size and minimal height above the mounting panel are paramount. The combination of precise fingertip control with low profile rocker button, allows system designers to develop very low profile control panel assemblies without sacrificing the functionality of a much larger single axis joystick.
This makes it ideal for applications such as remote control chest packs; operator controls for forklift trucks and off highway vehicles; and broadcasting and lighting control desks.
Key Features
Low profile
Analogue and switched outputs
Center return spring mechanism
Choice of track resistance values and output ranges
JC3000: Single and Dual axis Fingertip Joystick
NEW! The JC3000 joystick controller is designed for applications requiring a simplistic approach to fingertip control, where strength and reliability are important. The joystick can be specified as a dual axis or single axis controller, and comes with a range of user-defined features that provide unique functionality for numerous applications.
The JC3000 can be specified to generate up to 5 switched outputs per half axis, or analog potentiometer and switched center/directional reference signals. Optional mechanical detents that coincide with the switched output points can also be specified, providing operator feedback to the angular position of the joystick lever.
The joystick lever can accommodate a choice of different handle types, but no additional switch functions are available in the handles. The joystick is intended to be mounted in a protected environment, on applications such as a vehicle cab, control room or remote control chestpacks, and has IP66 protection above the mounting flange.
Key Features
Single or Dual axis operation
Rugged design using cast components
Protected to IP66 above the flange
Range of fingertip handle styles
Superb proportional control with analog and center/directional switched outputs
Choice of track resistance values and output ranges
Switched output option with detent feel – up to 5 positions in each half axis
Long operational life
SWJ: Multi-Axis Switched Joystick
SWJ Multi-Axis Switched Joystick
The SWJ is a compact, low profile switched joystick that provides on/off fingertip control in up to two axes.
Standing only 48mm high and capable of switching a resistive load of up to 1A. The joystick can be supplied with or without a sealing gaiter.
Key Features
Single or dual axis control
Self-centering lever action
IP65 sealed above the flange when protective gaiter fitted
T-Bar: Single Axis Friction Lock Joystick
T-Bar Single Axis Friction Lock Joystick
Developed for use in applications where compact size and simplicty is important, the T-Bar is a single axis ´put and stay function´ joystick that provides precise fingertip control.
Designed for use with electronic controllers, the conductive plastic track in the T-Bar generates an analogue signal, proportional to the distance and direction over which the handle is moved.
Typical uses are remote control chest packs for crane operation and material handling equipment, as well as control room function of winches and pumping systems.
Key Features
Single axis control
´Put and stay´ lever action
Proportional analogue output
Choice of mounting through side or top
SWR: Multi-Axis Switched Rocker
The SWR is a compact switched rocker mechanism offering fingertip/thumb control in up to 4 half axes.
The unit is supplied with an ´O´ ring to ensure IP66 sealing above the panel and is capable of switching a resistive load of up to 100mA
Key Features
Designed for simple thumb operation
Up to four half-axis control
Self-centering rocker action
IP66 sealed above the panel when ´O´ ring is fitted